Save With Our Customer Loyalty Scheme!
Only Available Online for Home Delivery
All Prices include VAT

Wax Melts Making Kits

Soya Wax Snowman Plastic Box Wax Melt Making Kit

Soya Wax Snowman Plastic Box Wax Melt Making Kit

Soya Wax Snowman Plastic Box Wax Melt Making Kit

Stock Status: In Stock
You Will Earn 27 points with this purchase
With the introduction of Soy wax, candle making has become an easy hobby for anyone to take up.

This wax is so easy and clean to use, you will soon be able to produce beautiful candles or melts for yourself or to give as presents. No special equipment is needed and all utensils are easily washed with soap and water. If you ever fancied having a go, then why not have a try. We will be happy to offer any advice that may help you along the way.

** This kit does "not" contain a thermometer as some people may already have one. It is a handy piece of equipment, so there is another kit listed with a thermometer included in the shop. **

Your kit will contain:

    1 kilo of Soy wax flakes.
    6 x 5grm wax dye chips.
    10 x snowman plastic box moulds.
    10 x 15ml fragrance oil.

Plus an instruction sheet to help you on your way.

The kit will contain the
following Christmas fragrance oils:

    Candy Cane
    Christmas Cookies

    Christmas Rumball
    Christmas Splendour

    Christmas Tree
    Frankincense & Myrrh
    Joyeux Noel
    Sleigh Ride
    Sugared Spruce

INSTRUCTIONS: When pouring, make sure your wax temperature is cool and pour slowly. We recommend your wax is no hotter than between 65°C and 70°C but ideally between 55°C and 60°C, anything above this will melt the plastic or find any weak spots. Pour a small amount (5mm) into each individual cell first and allow to start to set, this will check for any flaws. If all is ok, continue to slowly fill the box. This will minimise the risk of wax spillages. If you see any leakage from the small pour, pop the box to one side and when the wax is set remove for re use. Please notify us immediately if any problems occur.


DO NOT separate the boxes by pulling on the lid. Work them apart at the cavity end.

PLEASE ensure your wax is at the right temperature which we recommend is between 55°C and 60°C. Wax that is too hot will melt the plastic or find any weak spots.

ALWAYS pour on a protected surface.

ANY boxes that leak will seal rapidly, as long as the wax is poured at the correct temperature, therefore loss will be minimal.

DO NOT discard any spilled wax. Once the box is set, any spilled wax can be melted down and poured back in the top.

IF you have faulty, unusable boxes, please retain for our inspection.

DO NOT discard boxes until contacting us first.
  • Condition:
  • Weight: